Cementex CPGI Insulated Glove Inflator for Glove Inspections
Description
The Cementex CPGI Insulated Glove Inflator with a non-slip base is designed for a quick and thorough inspection of rubber insulating gloves. According to OSHA 1910.137(b)(2)(ii) protective rubber gloves shall be given an air test, as well as inspected visually, before each use and immediately following any incident to make sure that the insulating gloves are not damaged. No straps or bands are required for inspections of Class 00, Class 0 and Class 1 electrician gloves (with beige, red & white labels). A Velcro strap should be used to inspect rubber insulating gloves of Classes 2, 3 and 4 (yellow, green & orange labels).
The Cementex CPGI glove inflator is supplied with a Velcro strap in a drawstring storage bag.
Related products
-
Ansell AlphaTec® 38-628
Combination of butyl and viton layer of 0.7mm for a maximum protection against hazardous chemicals
-
6-6490 Odin Tig&Mig
Welding glove in flexible and durable goatskin provides good dexterity. Unlined, long cuffs in split leather and elastic over backhand. For tig, mig and argon welding requiring dexterity. Seams in Kevlar®. -
REGELTEX GLB0-36-10
ELECTROVOLT INSULATING GLOVES
-
Weldas COMFOflex welding gloves 10-2655L 10-2655M
ThunderingBison™ welding glove with reinforced hand of grain bison leather, a cuff of split cowhide and back with COMFOflex® lining
-
GLOVE ISO ARC
For electrical work with a maximum voltage of 1000 volts. Designed to be used in Arc Flach environement. ATPV 21,6/cal. ATPV 21,6 cal/cm2 . Arc flash rating performed by a third party lab: box test 4KA/30cm. Its dielectric natural latex composition on chlorinated interior base makes it very comfortable. The outer orange elastomer layer provides excellent mechanical resistance and the glove can also be used without over glove. Its anatomical shape makes flexing easier while ensuring a high level of protection. Product appreciated for its long life and precision. Its patterned finish gives it a highly appreciated grip in damp conditions. Minimum order quantity: 1 pair. Carton: 50 pairs.
-
Cotton Polka Dot Gloves
Fine-knit cotton glove with PVC dots. Knitted rib at end of cuff to prevent penetration of dust and dirt. Good grip. Suitable for allround use. Minimum order quantity: 1 bundle of 12 pairs. Carton: 20 bundles.
-
GLOVE BARRIER
Chemical resistant, 5 layer laminated glove. Hand-specific and ergonomic design. Wide Spectrum Resistance. 100% inspected. Each glove is individually air-pressure tested. Minimum: 1 pair. Carton: 6 times 12 pairs in a big bag
-
GLOVE ALPHATEC 305MM
Chemical glove in Nitrile, incorporates revolutionary Ansell Grip Technology to enable users to handle wet or oily objects with less grip force and more control. Standards EN 388 and 374 Cat 3.